IP3X 12kV Medium Voltage Switchgear Box RMU Intelligent Switchgear Organization

Box Type Fix Type AC RMU Switchgear (side install type)

General of Box Type Fix Type AC RMU Switchgear:

XGT2(XGN□)-12 Box Type Fix Type AC RMU Switchgear (side install type) (following abbreviation switch) is used in 10KV three-phase AC 50Hz indoor system as accepting and distributing electric energy, especially suitable in the occasion of frequently operates. The bus system is one bus. This switch fits the requirement of national standard GB3906<3~35kV's AC metal closed switch>and IEC298, and possesses tightly the shutting merit ability of" five guards ".This switch apparatus has been surmounted old type fixed switchgear's defects such as the switch volume is huge and the maintenance is not convenience, etc. and has surmounted moving out type switchgear's defects of complicated handcart organization, once connection the protection operation organization is unreliable, etc. It is a new, small and fixed type switchgear of researching and developing by self.

The main switch that this switchgear adopting is VT2A- 12's mould side loading type vacuum circuit breaker developed and designed by self.

GT7 (GN□)-12 series designed by self is selected as upper and down disconnecting switch, which has the following feature:

Reliable electrical connection

Convenient examined and repaired.

Installation of primary cable can be accomplished before the cabinet

Product can be installed by the wall.

Use integration design operation mechanism and interlock device of disconnecting switch and grounding switch, the operation and interlock is convenient and reliable.

Primary component is arranged vertically.

The breaker room, bus room and cable room have relief pressure channel.

The frame is combined by applying Al-Zn; It is the smallest volume in the fixed switchgear of double disconnecting switch in the internal: Wide x Deep x Height= 750 X1100 X2100

Structure diagram:

Technical parameters of Box Type Fix Type AC RMU Switchgear:

Notes for ordering for Box Type Fix Type AC RMU Switchgear:

Please provide the followings:

1. Main wiring scheme code and single wiring system diagram and layout diagram;

2. Secondary principle diagram, terminal alignment diagram, if no terminal alignment diagram, as per factory standard;

3. Model, specifications, quantity of electric components of switchgear;

4. Material and specification of main busbar and branch busbar;

5. Please indicate if switchgear shall be in special service condition;

6,Please indicate type and quantity of other accessories, If necessary.

3. Model, specifications, quantity of electric components of switchgear;

4. Material and specification of main busbar and branch busbar;

5. Please indicate if switchgear shall be in special service condition;

6,Please indicate type and quantity of other accessories, If necessary.