132kv Compact Transformer Substation Dyn11 Power Distribution Equipment OEM

110kv~132kvMobile Substation with Power Transformer and Gis and Traction Tractor

1. Product introduction

The Mobile Substation, manufactured by Ningbo Tianan is mainly used as a quick substation to the conventional substation to resume power supply in emergency. It be Used In the high-load season alleviate the shortage of power supply capacity and As a temporary substation put into operation. It can be put into immediate service with just a simple laid out, connecting to the incoming and outgoing cables upon arrival at the site.

The mobile substation has the advantages of compact structure, reliable operation, complete functions, highly intelligent ,quick site operation, less maintenance ,etc, Prefabricated semi-care hanging car mobile substation can be designed according to user requirements, can be configured as twin car or bicycle or car based on user conditions.

2.Service condition

1 Ambient condition

a. Altitude ≤ 1000m；

b. Ambient temperature

Range of temperature: -25℃～+40℃；

c. Wind speed (outdoor) ≤ 35m/s；

d. Relative humidity ≤ 90%(+25℃)；

e. Installation spot

The place shall have no fire, explosion, chemical corrosion and exquisite vibration.

2 Move condition of the substation

a. Max. speed ≤ 30km/h,when road surface is flat；

b. Max. speed ≤ 10km/h, when road surface is not flat.

Note: If the above condition can’t satisfy requirements, customer can consult with manufacturer to resolve it.

3.Technology features

3.1 Transformer Tank sealed structure adopted Tianan general structural design, with strict control of sealing material and the compression coefficient of the sealing rings; a formal leak test would be carried out after the completion of assembly process, so as to ensure the tank is leakage-free.

3.2 For the core fabrication, we use high quality and superior performance Hi-Bsilicon steel sheet, using the CNC controlled CEORG core cutting line, ensure the silicon steel burrs and angle error, so that after the cutting, it can be moved to the stacking process right away.

For the core stack, we adopted 45 degrees with full reclining, multi-joint core type. Core columns are pre-compressed; use synthetic material or steel ribbon, together with the corresponding 

use synthetic material or steel ribbon, together with the corresponding